Commercial Dehumidifier : WM150

Description

EIPL dehumidifiers are effective solutions to environmental control problems. The WM range of units, are high capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the refrigeration process.
The fan draws the moist air through the cold evaporator coil, which cools the air below its dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped with an internal condensate pump for easy removal of collected moisture. The cooled air then passes through the hot condenser coil where it is reheated using the same energy removed during the cooling phase, plus the additional heat generated by the compressor. The air is, therefore, discharged from the dehumidifier at a slightly higher temperature with a lower absolute humidity than that which entered. Continuous circulation of air through the dehumidifier gradually reduces the relative humidity within the area.
Because the WM range of units are equipped with an internal humidistat, they automatically switch on and off to save energy and expense by maintaining the desired level of humidity with intermittent operation.
The WM150 offers approx 30 litres/day extraction.

Specification:

• Model : WM150
• Effective for room volumes approx 300m3
• Extraction rate: approx. 30 Litres/day
• Dimensions – (h x w x d) 680mm x 810mm x 305mm
• Weight: 75kg
• On/Off Control Via Humdistat
• Compressor type – Reciprocating
• Reverse Cycle Defrost
• Electronic Defrost Timer
• Status indicators
• Wall mounting bracket
• Rubber Anti Vibration Feet
• 1 Fan Speeds
• Refrigerant Type-R407C
• Free Standing
• Integral Condensate Pump
• Air filter
• Moulded Mains Plug

 Technical Brochure

IN STOCK